How to Fix Error Code 05 (ER05)
- on the Sage Barista Touch Coffee Machine
100% Guaranteed Fix or Your Money Back for the Product
If you have turned on your Sage Barista Touch/Breville Barista Touch and see a message "Start up error ER05" or Error Code 05 don't panic, this is a common issue that can often be fixed at home with a simple DIY repair.
In this step-by-step guide we'll explain what Sage Error Code ER05 means, why it happens and how to repair your Breville/Sage coffee machine safely.
What you will need
- Sage/Breville ER05 Fix Kit
- Philips screwdriver
- Towel/mat to protect your machine
Sage/Breville ER05 Fix Kit
We have been selling the genuine Sage/Breville NTC Assembly Kit for over 2 years, we have had no negative reports yet of any customers having issues fitting their kits or the kit not resolving the ER05 fault.
There are a lot of other non genuine parts for sale and many complex solutions to the error code ER05, these solutions are only useful to experts or DIY professionals. We hope to provide a fool proof solution for Error Code 05.
For a successful DIY Sage repair we strongly recommend using genuine Sage/Breville service parts to ensure the best long-term performance.
How to Fix Sage/Breville Error Code ER05
This is the message that you are probably seeing on your Sage/Breville machine:
Start Up Error
Please contact Sage customer support
An error has occured during start-up
Error code:
ER05
What is the Error Code 05 on your Sage/Breville machine? Error code ER05 on the Sage Barista Touch, Sage Barista Pro and other Breville machines usually means that your NTC milk sensor has failed.
You can perform a simple DIY repair at home using a genuine ER05 Fix Kit. This repair involves replacing the NTC sensor assembly.
We offer an authentic Sage/Breville Fix Kit with fast worldwide shipping so you can restore your machine without sending it in for a costly service or repair.
If you prefer a visual tutorial, you can watch our detailed 8-minute video repair guide showing each step of the Breville/Sage ER05 fix.
Step-By-Step Guide: How to Fix Sage Error Code ER05
1. Preparation - Power off your machine and make sure it is unplugged from the mains. Remove your drip tray and bean hopper. Find a clear workspace, lay a towel or mat down and place your machine on its back.
2. Remove the base cover - There are 5 screws to remove from the base of the machine. See the diagrams below, the 5 screws are circled.
After the Fix
You can now plug your machine back in and turn it on. It should be repaired and start up as normal for you again!
FAQs
How fast is the delivery for the ER05 Fix Kit?
At checkout you will see an estimated delivery time showing you how long it will take to arrive.
How much does shipping cost for the ER05 Fix Kit?
At checkout you will be shown a quote for the delivery charges.
What if the ER05 repair kit doesn't work?
Contact us at info@homecoffeemachines.ie and we will give you a full refund on the product cost.
